You can select the “Bass” preset from the dropdown menu as a good starting point for a boosted bass. Bass control doesn’t always mean boosting your low end though. If you need more bass (and let’s face it, you could always use a little more bass), increasing this parameter will bring your audio to life with a deep, rich tone. Sound properties on the HP laptop may be set to enhance sound volume and quality. In FxSound’s interface, the bass slider controls a targeted, compressed boost to your low frequencies. Tip: If you’re unhappy with your changes, you can always set everything back to default by clicking “Reset”. HP laptops are equipped with speakers and internal sound cards. You can even use the Bass preset as a starting point for your manual configuration. While you can adjust the sliders manually, you could instead use the drop-down box to select the “Bass” equaliser preset. The fastest and easiest way to get a bass boost on Windows is by simply going to your Sound Devices and additional device properties, them enabling the bass.

You can manually adjust the sliders to configure the bass boost. You don’t need to save your setup as a user-defined preset, but you can choose to do so if you want.

Tip: The sound will change in real-time as you adjust the sliders, so having sound playing as you adjust them will really help you understand the effects the changes you make have. All of the numbers are in Hz, pronounced “Hertz”, with lower numbers representing a deeper sound. With the Graphic EQ, short for Equaliser, you can manually adjust the volume levels for specific frequencies. Switch to the “Enhancements” tab, then tick the box next to “Equalizer”, then click on the triple-dot icon in the bottom-right corner. In the Properties window, switch to the “Enhancements” tab, then tick the box next to “Equalizer”, then click on the triple-dot icon in the bottom-right corner. Switch to the “Playback” tab, then right-click on the output device you want to configure and select “Properties”. Tip: You can only configure the equaliser for one output device at a time, so make sure it’s the one you’re currently using and that you manually apply it to your other devices if you want it there too. In the Sound settings, switch to the “Playback” tab, then right-click on the output device you want to configure and select “Properties”. Right-click on the volume icon in the bottom-right, then click on “Sounds”. To do so, right-click on the volume icon in the system tray in the bottom right corner of the start bar and select “Sounds”. You can use Windows’ built-in equaliser to boost the bass of your speakers.

How to boost bass